How to Size a Commercial Solar System Around Your Business

The right commercial solar system size starts with how your business uses electricity. Two buildings with similar floor areas can need very different systems if one is a daytime office and the other runs refrigeration through the night.

If you are researching how to determine solar system size for commercial property, begin with electricity records, operating hours and a realistic look at the site. Those inputs help you understand why a proposal recommends a particular capacity and what that capacity is expected to achieve.

Start With Your Business’s Electricity Use and Operating Hours

Gather at least a full year of electricity bills if you have them. Include every meter involved in the project and identify any months when the business operated unusually, such as a closure or an equipment failure.

Ask about obtaining interval usage data, which shows how electricity demand changes through the day. Annual consumption gives the designer a starting point; the timing of that consumption helps explain how solar generation may line up with the operation.

Describe the working schedule behind the numbers. A restaurant with evening trade, a cold-storage facility and an office with weekend closures will each need a different discussion, even if their yearly energy totals are similar.

Understand kW, kWh and the First Sizing Estimate

Kilowatts, or kW, describe power. Kilowatt-hours, or kWh, describe energy used or generated over time. A system’s kW rating does not mean it generates that amount of energy continuously.

A preliminary calculation divides a target annual generation figure by an estimated annual yield per installed kW. For illustration, 120,000 kWh divided by an assumed yield of 1,500 kWh per kW gives an 80 kW starting estimate.

Those figures are an example, not a production forecast for your property. The yield needs to come from site-specific modeling. The PVWatts calculator estimates solar production using project inputs and weather data, and explains the uncertainty in its results. A detailed proposal should identify the assumptions behind its estimate.

Match Solar Production to Daytime Demand

Ask the designer to compare expected solar generation with the business’s usage pattern. Electricity produced while the operation needs it has a different billing effect from electricity exported to the grid.

Have the financial model use your actual tariff and the applicable export arrangements. An annual energy offset percentage alone cannot explain every part of the bill, particularly where charges depend on when or how quickly electricity is drawn.

For a business with substantial evening or overnight demand, compare the proposed solar design with the operating schedule. If storage is being considered, ask for a separate explanation of its purpose, capacity and effect on the assumptions.

Account for Roof Space, Future Loads and Site Limits

The available area needs to be assessed alongside the electricity records. Roof condition, shading, layout, structural suitability, electrical equipment and utility requirements can all affect the design.

Tell the team about planned refrigeration, machinery, a building extension or commercial EV chargers. Separate confirmed changes from possibilities so the proposal does not quietly treat every future load as certain.

If rooftop space limits the project, discuss whether a solar ground mount is appropriate for the property. A different location still needs its own site, design and approval review.

What Your Commercial Solar Proposal Should Explain

Ask for the recommended DC array capacity, inverter capacity, panel layout and expected annual and monthly generation. The production model should state its assumptions about shading, losses and the site.

Then ask how the recommendation connects to your business goals. It may target a portion of annual consumption, make use of a particular roof area or allow for a documented change in operations. The reason should be understandable from the proposal.

For Pacific Solar’s written savings guarantee, have the agreement identify the comparison method, assumptions, responsibilities and remedies that apply to your purchase arrangement. Cash purchases and financier-managed lease or PPA arrangements can have different remedies. Review the terms offered for your project rather than assuming every payment option carries the same refund provision.

Commercial Solar Sizing FAQs

Does every business need the same solar offset target?

No. Electricity use, operating hours, site constraints and the project objectives differ. Ask why the recommended target suits your operation.

Can solar panels power an entire commercial building?

A system may offset a substantial share of annual electricity use where the site and design support it. Annual offset does not mean the business operates independently of the grid at every hour or during an outage.

What if my business’s electricity use changes?

Give the designer details of confirmed changes and ask how the proposal handles them. Large changes can affect both the original sizing assumptions and any future expansion review.

Start With Your Business’s Actual Numbers

Bring your electricity bills, operating schedule and expansion plans to Pacific Solar. Request a Free Solar Savings Assessment to discuss a commercial solar system sized around your business.